Audio Authority Series 1500 User Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
8 Audio Authority
®
Series 1500 Installer’s Reference Guide
Audio Authority
®
Series 1500 Installer’s Reference Guide 9
Testing Your Installation
Check the following locations for successful power-up and connectivity, indicated as follows:
1500 Counter Station: All LEDs become dark until keys are pressed
1509 Audio Hub: ashing green Power LED, rapidly ashing counter station and lane station LEDs
1510 Hub system card: ashing green LED, rapidly ashing counter station and lane station LEDs
1520 Lane Station: rapidly ashing Power LED
Check system operation by selecting each lane and speaking with an assistant at the customer position. Adjust Lane
Microphone and Speaker gains using the Model 1550 Field Setup LCD.
Troubleshooting Tips
Always test your Cat 5 cables with a cable tester – even pre-made cables
Try connecting Counter Station directly to Lane Station to rule out faulty system components
In case of unexpected performance, restore system defaults to rule out incorrect system parameters
Acoustical Coupling
Increase separation of lane microphone and speaker
Isolate lane microphone and speaker with sound-
damping barrier (i.e. foam rubber)
Mount lane speaker and microphone on separate
surfaces or adjust their mounting angles
Adjust inbound, outbound or open loop gain levels
The Deal Drawer Doesn’t Sound Right
Fill hollow cavities in the deal drawer with foam
rubber sheets or blocks
Do not rest Counter Station directly on top surface of
deal drawer
Repeating Pops in Audio
Check Cat 5 cables - consistently use EIA 568A or
EIA 568B standard cable termination
No Inbound / Outbound Video or Poor Video
Quality
Check Cat 5 cables - consistently use EIA 568A or
EIA 568B standard cable termination
Eliminate long coaxial cable runs between cameras/
displays and Lane Station.
Lane Keys Don’t Respond
Keys not assigned to Counter Station – reassign keys
or restore factory defaults in conguration menu
Counter Station LEDs Remain in ‘Burn in’ Pattern
Check Cat 5 cable - consistently use EIA 568A or EIA
568B standard cable termination
Ensure Counter Station is connected to the correct
hub port
Lane Microphone Doesn’t Work
Ensure microphone is electret condenser type
Check microphone polarity
Wind Noise
Can often be eliminated by putting a small plug of
3M Scotchbrite™ in the microphone opening. The
Audio Authority lane microphone has a special foam
surround; for optimum results, use Audio Authority
microphones.
Common Issues
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments