Audio Authority 1580 series Specifications download pdf (Page 15)

Audio Authority

®

Series 1580 Installer’s Reference Guide 15

5 WHITE / BLUE

7 WHITE / BROWN

6 GREEN

3 WHITE / GREEN

2 ORANGE

4 BLUE

8 BROWN

1 WHITE / ORANGE

5 WHITE / BLUE

7 WHITE / BROWN

6 GREEN

3 WHITE / GREEN

2 ORANGE

4 BLUE

8 BROWN

1 WHITE / ORANGE

1 - WHITE/GREEN

2 - WHITE/ORANGE

3 - BLUE

4 - WHITE/BLUE

5 - ORANGE

6 - GREEN

1 - GREEN

2 - ORANGE

3 - WHITE/BLUE

4 - BLUE

5 - WHITE/ORANGE

6 - WHITE/GREEN

5 WHITE / BLUE

7 WHITE / BROWN

6 GREEN

3 WHITE / GREEN

2 ORANGE

4 BLUE

8 BROWN

1 WHITE / ORANGE

5 WHITE / BLUE

7 WHITE / BROWN

6 GREEN

3 WHITE / GREEN

2 ORANGE

4 BLUE

8 BROWN

1 WHITE / ORANGE

1 - WHITE/GREEN

2 - WHITE/ORANGE

3 - BLUE

4 - WHITE/BLUE

5 - ORANGE

6 - GREEN

1 - GREEN

2 - ORANGE

3 - WHITE/BLUE

4 - BLUE

5 - WHITE/ORANGE

6 - WHITE/GREEN

Cat 5e or Cat 6 is UTP (Unshielded

Twisted Pair) cable that can be used

to connect Series 1580 components

except for locations where shielded

twisted-pair cable is required.

Terminate the ends of each Cat 5e/6

cable with RJ-45 modular plugs

using the EIA 568B pinout (paired

1-2, 3-6, 4-5, and 7-8). Pre-made

network cables may also be used

for shorter runs. TEST all cables

(including pre-made) with a network

cable tester.

Cat 5e/6

Cat 5 Cable Fabrication

RJ-45 plug with pins facing up and clip facing away.

CABLES ARE WIRED THE SAME ON BOTH ENDS (NOT CROSSED OVER).

Appendix: Multi-Pair Cable Termination

DUAL LANE

STATION JACK

(OPPOSITE

PINOUT)

Cat 3 Cable Fabrication

(For 1540 or 1541 Lane Handset)

For customer handsets use 3-pair

Category 3 cable. Terminate at each

end with an RJ-12 plug (sometimes

referred to as RJ-25). One end is

terminated opposite (mirror image) to

the other.

Lane Wiring, Three Devices

Use 3-pair shielded, paired cable

for up to three devices. See page

4 to determine the required gauge.

Always use one pair for mic (+ / –)

and speaker (+ / –). The other pair

can be used for blower mute, trafc

sensor, or call button.

ALWAYS TRIM THE DRAIN WIRE

AT THIS END.

CUSTOMER DRIVE-UP END

DUAL LANE

STATION

MICROPHONE

SPEAKER

CALL BUTTON

DRAIN WIRE

(DO NOT CONNECT

AT THIS END)

SHIELD

CUT DRAIN WIRE

DUAL LANE

STATION

MICROPHONE

SPEAKER

CALL BUTTON

COMMON (SHARED)

TRAFFIC SENSE

BLOWER MUTE

DRAIN WIRE

(DO NOT CONNECT

AT THIS END)

SHIELD

CUSTOMER DRIVE-UP END

Lane Wiring, Five Devices

Use 4-pair shielded, paired cable

for up to ve devices. See page 5

to determine the required gauge.

Always use one pair for mic (+ / –)

and speaker (+ / –). The other

devices share a common.

ALWAYS TRIM THE DRAIN WIRE

AT THIS END.

CUT DRAIN WIRE

HANDSET

JACK

Cat 3

CABLE WIRED OPPOSITE ON ONE END (CROSSED OVER).

1 2 ... 10 11 12 13 14 15 16

Comments to this Manuals

No comments